19 U.S.C. § 2571 | Definitions

As used in this subchapter—

(1)

Agreement

section 3511(d)(5) of this titleThe term “Agreement” means the Agreement on Technical Barriers to Trade referred to in .

(2)

Conformity assessment procedure

The term “conformity assessment procedure” means any procedure used, directly or indirectly, to determine that relevant requirements in technical regulations or standards are fulfilled.

(3)

Federal agency

The term “Federal agency” means any of the following within the meaning of chapter 2 of part I of title 5:

(A)

Any executive department.

(B)

Any military department.

(C)

Any Government corporation.

(D)

Any Government-controlled corporation.

(E)

Any independent establishment.

(4)

International conformity assessment procedure

The term “international conformity assessment procedure” means a conformity assessment procedure that is adopted by an international standards organization.

(5)

International standard

The term “international standard” means any standard that is promulgated by an international standards organization.

(6)

International standards organization

The term “international standards organization” means any organization—

(A)

the membership of which is open to representatives, whether public or private, of the United States and at least all Members; and

(B)

that is engaged in international standards-related activities.

(7)

International standards-related activity

The term “international standards-related activity” means the negotiation, development, or promulgation of, or any amendment or change to, an international standard, or an international conformity assessment procedure, or both.

(8)

Member

section 3501(10) of this titleThe term “Member” means a WTO member as defined in .

(9)

Private person

The term “private person” means—

(A)

any individual who is a citizen or national of the United States; and

(B)

any corporation, partnership, association, or other legal entity organized or existing under the law of any State, whether for profit or not for profit.

(10)

Product

The term “product” means any natural or manufactured item.

(11)

Secretary concerned

The term “Secretary concerned” means the Secretary of Commerce with respect to functions under this subchapter relating to nonagricultural products, and the Secretary of Agriculture with respect to functions under this subchapter relating to agricultural products.

(12)

Trade Representative

The term “Trade Representative” means the United States Trade Representative.

(13)

Standard

The term “standard” means a document approved by a recognized body, that provides, for common and repeated use, rules, guidelines, or characteristics for products or related processes and production methods, with which compliance is not mandatory. Such term may also include or deal exclusively with terminology, symbols, packaging, marking, or labeling requirements as they apply to a product, process, or production method.

(14)

Standards-related activity

The term “standards-related activity” means the development, adoption, or application of any standard, technical regulation, or conformity assessment procedure.

(15)

State

The term “State” means any of the several States, the District of Columbia, the Commonwealth of Puerto Rico, the Virgin Islands, American Samoa, Guam and any other Commonwealth, territory, or possession of the United States.

(16)

State agency

The term “State agency” means any department, agency, or other instrumentality of the government of any State or of any political subdivision of any State.

(17)

Technical regulation

The term “technical regulation” means a document which lays down product characteristics or their related processes and production methods, including the applicable administrative provisions, with which compliance is mandatory. Such term may also include or deal exclusively with terminology, symbols, packaging, marking, or labeling requirements as they apply to a product, process, or production method.

(18)

United States

The term “United States”, when used in a geographical context, means all States.

Pub. L. 96–39, title IV, § 451July 26, 197993 Stat. 249 Pub. L. 103–182, title III, § 351(b)(1)Dec. 8, 1993107 Stat. 2122 Pub. L. 103–465, title III, § 351(e)Dec. 8, 1994108 Stat. 4956 Pub. L. 104–295, § 20(c)(16)Oct. 11, 1996110 Stat. 3529(, , ; , , ; , , ; , , .)

Editorial Notes

References in Text

Chapter 2 of part I of title 5, referred to in par. (3), probably means chapter 1 of part I of title 5, which is classified to section 101 et seq. of Title 5, Government Organization and Employees, and which relates to organization of agencies.

Amendments

Pub. L. 104–2951996—Par. (6)(A). substituted “; and” for period at end.

Pub. L. 103–465, § 351(e)(1)section 3511(d)(5) of this title section 2503(a) of this title1994—Par. (1). , amended par. (1) generally, substituting “referred to in ” for “approved under ”.

Pub. L. 103–465, § 351(e)(2)Par. (2). , amended heading and text of par. (2) generally. Prior to amendment, text read as follows: “The term ‘certification system’ means a system—

“(A) for determining whether a product conforms with product standards applicable to that product; and

“(B) if a product so conforms, for attesting, by means of a document, mark, or other appropriate evidence of conformity, to that conformity.

Such term also includes any modification of, or change to, any such system.”

Pub. L. 103–465, § 351(e)(3)Par. (4). , substituted “conformity assessment procedure” for “certification system” in two places.

Pub. L. 103–465, § 351(e)(4)Par. (6)(A). , amended subpar. (A) generally. Prior to amendment, subpar. (A) read as follows: “the membership of which is open to representatives, whether public or private, of the United States and—

“(i) all Parties to the Agreement, or

“(ii) some but not all Parties of the Agreement; and”.

Pub. L. 103–465, § 351(e)(5)Par. (7). , substituted “conformity assessment procedure” for “certification system”.

Pub. L. 103–465, § 351(e)(6)Par. (8). , amended heading and text of par. (8) generally. Prior to amendment, text read as follows: “The term ‘Party to the Agreement’ means any foreign country or instrumentality determined by the President to have assumed, and to be applying, the obligations of the Agreement with respect to the United States.”

Pub. L. 103–465, § 351(e)(7)Par. (13). , amended heading and text of par. (13) generally. Prior to amendment, text read as follows: “The term ‘standard’ means any of the following, and any amendment or change to any of the following:

“(A) The specification of the characteristics of a product, including, but not limited to, levels of quality, performance, safety, or dimensions.

“(B) Specifications relating to the terminology, symbols, testing and test methods, packaging, or marking or labeling requirements applicable to a product.

“(C) Administrative procedures related to the application of any specification referred to in paragraph (A) or (B).”

Pub. L. 103–465, § 351(e)(8)Par. (14). , substituted “, technical regulation, or conformity assessment procedure” for “or any certification system”.

Pub. L. 103–465, § 351(e)(9)Pars. (17), (18). , added par. (17) and redesignated former par. (17) as (18).

Pub. L. 103–1821993—Par. (12). amended par. (12) generally. Prior to amendment, par. (12) read as follows:

Special representative“(12) .—The term ‘Special Representative’ means the Special Representative for Trade Negotiations.”

Statutory Notes and Related Subsidiaries

Effective Date of 1994 Amendment

Pub. L. 103–465Jan. 1, 1995section 352 of Pub. L. 103–465 section 2531 of this titleAmendment by effective on the date on which the WTO Agreement enters into force with respect to the United States (), see , set out as a note under .